Overview - Siemens simatic et 200s Operating Instructions Manual

Overview

How the Manual is Structured
This manual complements the manual
It contains descriptions of the ET-200S modules that can be used for serial communication.
How to Find Your Way Around
At the beginning of each chapter you will find a Product Overview, which lists the features
and applications of the module described. You will also find the order number of the module
and the name and release of the software required. For the current GSD file, go to:
http://support.automation.siemens.com
In each chapter you will then find a section with the heading Brief Instructions on
Commissioning followed by the name of the relevant module. These brief instructions tell you
in a series of short steps how to install and configure the module, how to integrate it in your
use program, and how to test it in your user program.
Index
The index contains keywords that come up in the manual.
Further Support
Should you have any questions on the products described which are not answered in this
documentation, please contact your local Siemens partner.
Your partner can be found under:
http://www.siemens.com/automation/partner
Your guide to the technical documentation for the individual SIMATIC products and systems
can be found under:
http://www.siemens.com/simatic-tech-doku-portal
The online catalog and the online order system can be founder under:
http://mall.automation.siemens.com/
ET 200S Positioning
Operating Instructions, 05/2007, A5E00124871-04
Distributed I/O System ET 200S
1
.
13