Table 4-1 Terminal Assignment Of The 1Posinc/Analog - Siemens simatic et 200s Operating Instructions Manual

Installation, Wiring, and Fitting
Install and wire the TM-E30S44-01 terminal module. Insert the 1PosInc/Analog in the
terminal module (you can find detailed instructions in the
Table 4-1 Terminal assignment of the 1PosInc/Analog
Terminal assignment
ET 200S Positioning
Operating Instructions, 05/2007, A5E00124871-04
4.2 Brief Instructions on Commissioning the 1PosInc/Analog
View
Connection of the Incremental
Encoder with 5 V Differential
Signals: Terminals 1-8
1: A
5: /A
3: B
7: /B
2: 24 VDC
6: M
4: N
8:/N
Distributed I/O Device
Remarks
Connection of the Switches and
the Drive: Terminals 9-16
Track A 9: IN0
13: IN1
Track B 14: IN2
10: 24 VDC
Voltage supply for 12: QV+
incremental encoder
16: M
Track N; optional zero 11: OUT
mark
15: M
1PosInc/Analog
manual).
Minus limit switch
Plus limit switch
Reducing cam; latch
signal
Encoder supply for
the switches
Analog output ± 10
or 0 V to 10 V to
ana
connect the drive
Digital output DO for
direct control or as a
directional signal for
the drive
115