Installation, Wiring, and Fitting
1. Install and wire the TM-E15S24-01 terminal module (see the following figure).
2. Connect the 1STEP 5V/204kHz to the terminal module (you will find detailed instructions
You can find out how to wire the power unit and the stepping motor in the relevant product
manuals.
Figure 2-1
ET 200S Positioning
Operating Instructions, 05/2007, A5E00124871-04
on how to do this in the
Terminal Assignment for the Example
2.2 Example : Commissioning 1STEP 5V/204kHz
Distributed I/O Device
manual).
1STEP 5V/204kHz
17