Operating System Boots With Problems; Intermittent Server Problems; Dvd Problems; Hard Drive Problems - HP AB464-9003F Service Manual

Hpe integrity rx6600 server user
Table of Contents

Advertisement

Operating System Boots with Problems

If the operating system is running and you are experiencing problems, use the following tools to
help solve the problem:
LEDs
Error Messages and event logs

Intermittent Server Problems

You can usually trace intermittent problems that occur during installation to power source problems,
a loose connector, or some other hardware problem. If you are experiencing intermittent problems,
follow these steps:
1.
Check iLO 2 MP logs and analyze the problem. Determine if there is more than one symptom
and if the problem is random.
2.
Verify that the AC power source is stable.
3.
Reseat all rear panel connectors.
4.
Reseat all hot-swappable fans and power supplies.
5.
Reseat all main memory DIMMs.
6.
Reseat all cable harnesses and board connectors.

DVD Problems

DVD problems that occur during installation are usually related to faulty connections. If you are
experiencing DVD problems, follow these steps:
1.
Remove and reinsert the DVD.
2.
Replace the DVD.
3.
Remove and reinstall the DVD drive. Check that connectors are fully engaged.
4.
Replace the DVD drive.

Hard Drive Problems

Hard drive problems that occur during installation are usually due to rough handling. The drive
may not be correctly seated or may have been damaged in transit. If you are experiencing hard
drive problems, follow these steps:
1.
Remove and reinsert the hard drive.
2.
Swap the hard drive with one from another slot or with a known good spare.
3.
Remove and reinstall the hard drive backplane. Check that connectors are fully engaged.
4.
Replace the hard drive backplane.
5.
Replace the SAS core I/O card.

Console Problems

Console problems during installations can be caused by faulty interconnections. If you are
experiencing monitor, keyboard, or mouse problems, follow these steps:
1.
Check the monitor controls. Adjust contrast and brightness as required.
2.
Inspect all power and interconnecting cables. Check that all console connectors are fully
engaged.
3.
Check that all iLO 2 MP board connectors are fully engaged.
4.
Exercise the appropriate self-test features of the console software.

Downloading and Installing the Latest Version of the Firmware

Hewlett Packard Enterprise makes every effort to provide you with the most current version of
firmware. However, there can be instances when your firmware is not up to date.
114
Installing the System

Advertisement

Table of Contents
loading

Table of Contents