HP AB464-9003F Service Manual page 292

Synchronize Array
To perform a synchronization of the IM array, press Enter on Synchronize Array. The screen
prompts you to ask if you want to perform this action. Press Y for yes or N for no. This field is
grayed out under the following conditions:
The array is inactive.
The array does not need to be resynchronized.
The adapter's MPT firmware does not support the feature
Non-IR firmware is used.
IR is disabled. The array is inactive.
Activate Array
To perform an activation of an IM array, press Enter on Activate Array. The screen prompts you
to ask if you want to perform this action. Press Y for yes or N for no.
Delete Array
To perform the deletion of the currently displayed IM array, press Enter on Delete Array. The
screen prompts you to ask if you want to perform this action. Press Y for yes and N for no.
Identifier
Type
Scan Order
Size (MB)
Status
SAS Topology Screen
The SAS Topology screen presents a view of the adapter's SAS hierarchy, and provides other
user functionality. To access SAS Topology, press Enter on SAS Topology from the Adaptor
Properties screen.
Figure 93 SAS Topology Screen - Expander Closed
292 Core I/O Card Utilities
Displays the identifier of this array.
Displays the RAID type.
Displays the scan order of the array.
Displays the size of this array.
Displays the status of this array.