HP AB464-9003F Service Manual page 286

FW Revision
Status
Adapter Properties Screen
The Adapter Properties screen enables you to view and modify adapter settings. To scan the
SAS controller's devices, select a SAS controller and press Enter. The Adapter Properties screen
displays.
Figure 91 Adapter Properties Screen
Use the arrow keys to select RAID Properties, and press Enter to view the Select New Array
Type screen.
To access the following screens, use the arrow keys to select the screen, and press Enter on
the appropriate field:
RAID Properties
SAS Topology
Advanced Adapter Properties
The following are the descriptions for the Adapter Properties screen.
Adapter
286 Core I/O Card Utilities
Displays the Fusion MPT firmware version and type (IR or IT)
Indicates whether the adapter is or is not eligible for software control (enabled,
disabled or error)
Enabled Indicates the EFI Driver is either currently controlling the adapter,
or will attempt to control the adapter upon reload.
Disabled Indicates the EFI Driver is either not controlling the adapter, or
will discontinue control of the adapter upon reload.
Error Indicates that the EFI Driver encountered a problem with the
adapter. Viewing and modifying settings for the adapter is
allowed but the information and functionality available may be
limited.
Indicates the specific SAS Controller type.