Table of Contents
Advertisement
General Diagnostic Tools
The following tools are currently available for support on other Integrity server platforms. The
distribution method is through the web.
Table 51
lists the general diagnostic tools.
Table 51 General Diagnostic Tools List
Diagnostic Tool
IPMI Event Decoder
System Event Analyzer (SEA)
Fault Management Overview
The goal of fault management and monitoring is to increase system availability, by moving from
a reactive fault detection, diagnosis, and repair strategy to a proactive fault detection, diagnosis,
and repair strategy. The objectives are:
To detect problems automatically, as nearly as possible to when they actually occur.
To diagnose problems automatically, at the time of detection.
To automatically report in understandable text a description of the problem, the likely cause(s)
of the problem, the recommended action(s) to resolve the problem, and detailed information
about the problem.
To ensure that tools are available to repair or recover from the fault.
HP-UX Fault Management
Proactive fault prediction and notification is provided on HP-UX by SysFaultMgmt WBEM indication
providers, as well as by the Event Management System (EMS). The Event Management Service
and WBEM provide frameworks for monitoring and reporting events.
SysFaultMgmt WBEM indication providers and the EMS Hardware Monitors allow users to monitor
the operation of a wide variety of hardware products, and alert them immediately if any failure
or other unusual event occurs. By using hardware event monitoring, users can virtually eliminate
undetected hardware failures that could interrupt system operation or cause data loss.
Complete information on installing and using EMS hardware event monitors, as well as a list of
supported hardware, can be found in the EMS Hardware Monitors Users Guide. An electronic
copy of this book is provided on the Hewlett Packard Enterprise website at: http://www.hpe.com/
info/hpux-diagnostics-docs.
Description
Provides detailed information about the IPMI event (Problem description, cause,
action)
Program which automatically analyzes system error logs and IPMI SEL events.
Produces callout reports and CRU information (see http://www.compaq.com/
support/svctools/webes for more information about this tool).
Troubleshooting Tools 147
Advertisement
Table of Contents
Troubleshooting
