Table of Contents
Advertisement
1.
Access the iLO 2 MP using the LAN, RS-232 serial port, telnet, SSH, or web method. The
iLO 2 MP login prompt displays.
2.
Log in using the default the iLO 2 MP user name and password (Admin/Admin).
TIP:
For security reasons, Hewlett Packard Enterprise strongly recommends you modify
the default settings during the initial login session. See
Password" (page
The following items are available from the MP Main Menu:
iLO MP MAIN MENU:
CO:
VFP:
CM:
CL:
SL:
SMCLP:
HE:
See the Integrity iLO 2 Operations Guide for information on the iLO 2 MP menus and commands.
When logging in using the local or remote RS-232 serial ports, the login prompt may not display
if another user is logged in through these ports. To access the MP Main Menu and the iLO 2 MP
prompt (MP>), press Ctrl-B.
Additional Setup
This section provides additional information to setup the iLO 2 MP.
Modifying User Accounts and Default Password
The iLO 2 MP comes preconfigured with default factory settings, including a default user account
and password. The two default user accounts on initial login are:
All Rights (Administrator) level user:
login = Admin
password = Admin
Console Rights (Operator) level user:
login = Oper
password = Oper
IMPORTANT:
TIP:
For security reasons, Hewlett Packard Enterprise strongly recommends you modify the
default settings during the initial login session.
Make the following changes using any of the iLO 2 MP user interfaces.
To modify default account configuration settings, follow these steps:
1.
Log in as the administrator. You must log in as the administrator in order to modify default
user configuration settings
2.
To modify default passwords:
a.
Access the MP Main Menu.
b.
Enter CM at the MP> prompt.
c.
Enter UC at the MP:CM> prompt and follow the prompts to modify default passwords.
84
Installing the System
84).
Console
Virtual Front Panel
Command Menu
Console Logs
Show Event Logs
Server Management Command Line Protocol
Main Menu Help
X:
Exit Connection
Login and password are case sensitive.
"Modifying User Accounts and Default
Advertisement
Table of Contents
Troubleshooting
