Efi Menu Is Not Available; Operating System Does Not Boot; Operating System Boots With Problems; Intermittent Server Problems - HP Integrity rx2660 User's & Service Manual

Hide thumbs Also See for Integrity rx2660:
Table of Contents

Advertisement

EFI Menu is Not Available

If you cannot access the EFI from either the main disk partition or the CD, use the following tools
to help solve the problem:
Front panel LEDs
iLO 2 MP
Console messages
System event logs (SEL)

Operating System Does Not Boot

If the operating system does not boot, but you are able to reach the EFI from either the main disk
partition or the CD, use the following tools to help solve the problem:
Using the EFI Shell, check the system logs and analyze any error messages.
Offline Diagnostic Environment (ODE)

Operating System Boots with Problems

If the operating system is running and you are experiencing problems, use the following tools to
help solve the problem:
LEDs
Error Messages and event logs

Intermittent Server Problems

You can usually trace intermittent problems that occur during installation to power source problems,
a loose connector, or some other hardware problem. If you are experiencing intermittent problems:
1.
Check iLO 2 MP logs and analyze the problem. Determine if there is more than one symptom
and if the problem is random.
2.
Verify that the AC power source is stable.
3.
Re-seat all rear panel connectors.
4.
Re-seat all hot-swappable fans and power supplies.
5.
Re-seat all main memory DIMMs.
6.
Re-seat all cable harnesses and board connectors.

DVD Problems

DVD problems that occur during installation are usually related to faulty connections. If you are
experiencing DVD problems:
1.
Remove and reinsert the disk.
2.
Replace the disk.
3.
Remove and reinstall the DVD drive. Check that connectors are fully engaged.
4.
Replace the DVD drive.

Hard Drive Problems

Hard drive problems that occur during installation are usually due to rough handling. The drive
might not be correctly seated or could have been damaged in transit. If you are experiencing hard
drive problems:
1.
Remove and reinsert the faulty hard drive.
2.
Swap the hard drive with one from another slot or with a known good spare.
Installation Troubleshooting
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents