Replacing The Processor Board Assembly - HP AB464-9003F Service Manual

7. Grasp the handholds on the assembly carrier tray with both hands and carefully slide the
assembly out of the chassis
Figure 72 Removing the Processor Board Assembly

Replacing the Processor Board Assembly

To replace the processor board assembly, follow these steps:
1. Align the edges of the processor board assembly with the assembly guides in the chassis.
2. Slide the processor board assembly into the chassis until it begins to seat into the socket
located on the midplane board.
3. Push the processor board access door upward until it locks into position.
4. Replace the memory carrier assembly. See
(page 205).
5. Replace the memory carrier assembly cover and latch the top cover release lever closed.
See "Replacing the Memory Carrier Assembly Cover" (page
6. If rack installed, slide the server completely into the rack. See
Rack" (page
7. Reconnect the power cables and power on the server. See
(page 89).
216 Removing and Replacing Server Components
(Figure
177).
72).
"Replacing the Memory Carrier Assembly"
180).
"Inserting the Server into the
"Powering On the Server"