Help; Accessing The Host Console With The Tui - Co Command; Accessing The Host Console With Vkvm - Integrated Remote Console; Accessing The Host Console With The Smash Sm Clp - HP AB464-9003F Service Manual

1. Select the web interface functions by clicking the Function tabs at the top of the page. Each
function lists options in the Navigation Bar on the left side of the page.
2. Click an option link to display data in the Display screen; and click Refresh to update the
display.
3. Click the Remote Console tab. The remote console provides the following options to access
the console:
A serial console that behaves similarly to the TUI of the following section
The virtual KVM console

Help

The iLO 2 MP web interface has a robust help system. To launch iLO 2 MP help, click the Help
tab in the Display screen or click the ? at the top right corner of each page to display help about
that page.

Accessing the Host Console With the TUI - CO Command

This section provides the steps to access the host console using the text user interface (TUI).
To access the host console through the iLO 2 MP, follow these steps:
1. Log in using your user account name and password at the login page.
2. At the iLO 2 MP login prompt (MP>), enter the CO command to switch the console terminal
from the MP Main Menu to mirrored/redirected console mode. All mirrored data is displayed.
3. To return to the iLO 2 MP command interface, press Ctrl-B, or Esc and +.

Accessing the Host Console With vKVM - Integrated Remote Console

For information on how to access the host console using the vKVM feature through the Integrated
Remote Console (IRC), see the Integrity iLO 2 Operations Guide.

Accessing the Host Console with the SMASH SM CLP

For information on how to access the host console using the SMASH SM CLP, see the Integrity
iLO 2 Operations Guide.

Accessing the Graphic Console Using VGA

VGA is a method you can use to access the graphic console.
NOTE: You cannot access iLO 2 using VGA.
This method requires three elements:
Monitor (VGA connector)
Keyboard (USB connector)
Mouse (USB connector)
The graphic console output displays on the monitor screen.
IMPORTANT:
the server boots to the EFI Shell. Start a console session using the RS-232 serial port method
to view console output prior to booting to the EFI Shell or to access the iLO 2 MP. See
the iLO 2 MP LAN Using the RS-232 Serial Port" (page
To access the graphic console with VGA, follow these steps:
1. Perform preparation tasks.
The server console output does not display on the console device screen until
82).
Accessing the Host Console
"Configuring
87