Replacing The System Battery - HP AB464-9003F Service Manual

Figure 78 Battery Location on I/O Board
Core I/O Board Slot
1
I/O VRM
2

Replacing the System Battery

CAUTION:
removal and replacement of the I/O board assembly occurs through the rear of the rack for
rack-installed servers. Carefully follow the removal and replacement procedures; you must perform
several tasks with the server extended out the front of the rack. See
the I/O Board Assembly" (page 224)
1. Insert the replacement battery into the socket on the I/O board assembly.
IMPORTANT:
correctly engaged.
NOTE:
with the + sign facing up.
TPM
3
You must remove the I/O board assembly to service the system battery. The
Ensure that the new battery is fully seated and that all locking tabs are
The positive terminal of the battery is designated by the + sign. Install the battery
for complete instructions.
Removing and Replacing the System Battery 229
System Battery
4
"Removing and Replacing