Power Supply - HP AB464-9003F Service Manual

Figure 15 LAN Link and Status LEDs

Power Supply

The server can have one or two power supplies, labeled PS0 and PS1. Each power supply has
an AC input receptacle and an LED that shows the power state of the server
The server has three power states: standby power, full power, and off. Plug the power cord into
the appropriate receptacle on the rear of the chassis to achieve the standby power state. To
bring the server to full power plug the power cord into the appropriate receptacle, and either
activate the power using the iLO 2 MP PC command, or push the Power button. To bring the
server to the off state, unplug the power cords.
Table 13 lists the power supply LED states.
Table 13 Power Supply LED
Power Supply LED
Off
Blinking green
Solid green
Blinking amber
Figure 16 shows the power LEDs.
36 Overview
Power Supply Condition
No AC power
AC power; standby power on
Full power on; normal operation
Power supply failure
(Figure 13).