System Set Up; Shift - Beckman Coulter COULTER HmX Operator's Manual

6.4

SYSTEM SET UP

Shift

You can use the same bar code-labeled lots of
5C cell control on different shifts and store
them in different files. In this way, you can
generate separate control statistics for each
shift.
To set this up:
1. Select
System set up
2. Type in the starting times for each shift.
Press Û to move the cursor from field
to field.
The system automatically
r
calculates the end of the shift to
prevent overlap.
If you only need two shifts, set the
r
third shift to 1 minute. The time
periods add up to 24 hours
automatically.
Press Ò to save and escape.
3.
PN 4237519CB
Special Functions Set Up
tt
Shift .
tt
tt
6
SET UP
SYSTEM SET UP
6-17