Table of Contents
Advertisement
STARTUP AND CONTROLS
CONTROL RUN
Press Ë
4.
5.
Mix the control tube according to
package insert directions.
6.
Cycle the control:
a.
Open the tube and immerse the
aspirator tip
b.
Press and release the sample bar.
c.
Remove the tube when you hear
the beep.
7.
Check for H (High) or L (Low) beside
the results on the screen.
If there are no H's or L's, results are
r
within range.
If you see an H or L, go to
r
Table 2.2. Follow the
troubleshooting steps until you
solve the problem.
Optional: press Ì to print the control
8.
results.
Use Ê
9.
additional levels of control as required.
2-12
Ë
.
Run
SECONDARY
b
into the sample.
to select other files and run
File
PN 4237519CB
Advertisement
Table of Contents
