Table of Contents
Advertisement
5.
Do you want to add demographics
and/or comments?
If no, go to step 6.
r
If yes, continue with this step.
r
Note: Use Ê
previously set up Location and
Physician lists. To set up these lists,
refer to Chapter 6, Set Up.
Note: If the Date of Birth is prior to
1990, enter all four digits of the year.
6.
Enter Sequence # (optional).
If automatically sequencing, press
r
Û.
If not, type the sequence # or leave
r
blank and press Û.
7.
Repeat steps 2 through 6 for each
sample.
8.
If you want to print the Worklist:
Press Ð
a.
Press Ì
b.
Press Ý+W to go to the Run Samples
9.
screen and cycle the specimens. They
can be cycled in any order. The DMS
matches results to items on the Worklist
based on ID#1.
Status Messages
The Status column on the Worklist corresponds to the Status field on the Run Samples screen.
There are two conditions that cause a sample to remain on the Worklist after it has been run.
The two status messages associated with these conditions are explained below.
PN 4237519CB
Press Ë
a)
Comments
b)
Type in demographic data
and comments. Verify
that the entries are
correct. Entries made
during sample processing
or while the instrument is
transmitting data might
not be accepted. Then
press Ò
Save/Esc.
Choice list
to choose from
.
Tag All
.
Print
.
3
SAMPLE ANALYSIS
WORKLIST
3-21
Advertisement
Table of Contents
