SET UP
SYSTEM SET UP
Reagents
Use this option to record reagent
information at installation or whenever you
change a reagent. For the complete
procedure on how to replace a reagent
container, refer to the Special Procedures and
Troubleshooting manual, Chapter 4.
1.
Select
System set up tt Reagents.
2.
Key in the new reagent information,
pressing Û after each item:
lot number
r
date reagent opened
r
Note: Pressing Û automatically
gives you today' s date.
expiration date
r
Note: Do not forget to enter revised
expiration dates where appropriate,
for example, 60 days from date
opened for Lyse and Pak, 90 days
for Cleaner.
3.
Verify that all entries are correct.
Press Ò to save and escape.
4.
Institution
Use this option to determine what
institution information prints on the header
of your printed reports. Access to this option
requires the supervisor password.
1.
Select
System set up tt Institution
2.
Move the cursor from field to field and
type in your institution' s information.
Use the ß to toggle between Yes
and No under the Printed on graphics
report column.
Press Ò to save and escape.
3.
6-18
Special Functions tt Set Up tt
Special Functions tt Set Up tt
.
PN 4237519CB