Operational - Fujitsu fi-7160 Operator's Manual

Chapter 4 Various Ways to Scan
4.4 Customizing the Scanner Settings
Using a Button on the Scanner to Start Scanning
The [Scan/Enter] button on the operator panel can be
configured to perform scanning by pressing the button.
To configure this setting, you first need to assign an
application to be launched from the [Scan/Enter] button.
Computer Setup
1
Confirm that the scanner is connected to the computer,
then turn on the scanner.
For details about how to connect the scanner to the computer, refer to
the Quick Installation Sheet.
For details about how to turn on the scanner, refer to
Power ON/OFF" (page 19).
2
Display the [Control Panel] window.
 Windows Vista/Windows Server 2008/Windows 7
Click [Start] menu  [Control Panel].
 Windows Server 2012/Windows 8
Right-click the Start screen, and select [All apps] on the app bar
 [Control Panel] under [Windows System].
 Windows Server 2012 R2/Windows 8.1
Click [] on the lower left side of the Start screen  [Control
Panel] under [Windows System].
To display [], move the mouse cursor.
 Windows 10
Right-click [Start] menu, and then click [Control Panel].
3
Click [View devices and printers].
The [Devices and Printers] window appears.
4
Right-click on the scanner icon, and select [Scan
properties] from the displayed menu.
The properties window of the scanner appears.
5
Click the [Events] tab and select an event.
From the [Select an event] drop-down list, select an event from which
you want to launch an application.
"1.3 Turning the
In this function, the following events can be specified:
 [Scan Button]
Press the [Scan/Enter] button while the [Ready] screen displays
[F00]
 [Send to 1] to [Send to 50]
Press the [Scan/Enter] button while the [Ready] screen displays
[F01] to [F50]
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
84