Chapter 5 Daily Care
4
Close the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page
Be careful not to get your fingers caught
when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, the document
may not be fed into the ADF.
5
Reset the cleaning counter.
Reset the counter by performing one of the following actions:
Reset the counter in [4: Consumable counters] on the [Settings
Menu] screen of the operator panel.
For details, refer to
"3.2 Settings Menu" (page
Reset the counter in the Software Operation Panel.
For details, refer to
"Resetting the Sheet Counters" (page
21).
55).
160).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
100