Operational - Fujitsu fi-7160 Operator's Manual

Chapter 4 Various Ways to Scan
3
Adjust the stacker to fit the longest document.
For details, refer to "Documents with Different Sizes/Small Size
Documents" (page 25).
4
In the scanner driver, configure the scan settings to detect
the paper size automatically.
For details, refer to the scanner driver's Help.
5
Scan the documents with the image scanning application.
For details, refer to the image scanning application manual.
Documents Folded in Half
Sliding the feed mode switch left to switch the feed mode to
Manual/Single mode allows you to scan documents folded in
half (up to A2 size documents folded in half) as they are.
ATTENTION
When a document folded in half is scanned, the document may be fed
skewed if the folded part is too thick.
1
Fold the document in half so that the sides to be scanned
are facing out.
Fold it firmly and smooth out any creases.
Otherwise, it may cause the document to skew while the
feeding is in progress.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
78