Operational - Fujitsu fi-7160 Operator's Manual

Chapter 8 Operational Settings
Item
Document check area
specification for Multifeed
Detection
(page 178)
Intelligent Multifeed Function
(page 181)
Description
Selected range: Select this item to restrict the
area to run multifeed detection.
Enable/Disable (Middle): Specify whether to
enable or disable multifeed detection in the
selected area.
Start (Middle): Specify the start position of the
area in length (mm) from the leading edge of
the document.
End (Middle): Specify the end position of the
area in length (mm) from the leading edge of
the document.
When there is a paper of the same size
attached to a designated location on the page,
you can configure the scanner to memorize the
location of the attachment and not detect
multifeeds for that location.
Note that you first need to select [Check
Overlapping (Ultrasonic)] or [Check
Overlapping and Length] in either the scanner
driver or the multifeed detection setting in
"Specifying a Multifeed Detection Method
[Multifeed]" (page 176).
This setting can also be configured with the
operator panel.
Select to clear the overlap pattern (length,
location) memorized in Auto mode.
This setting can also be configured with the
operator panel.
Select to memorize the multifeed pattern on the
window to check an image that is detected as
multifeed.
Specify whether or not to memorize the
multifeed pattern upon power-off.
Parameter/Value
[Selected range] check box
Enable/Disable
(When [Selected range] is selected)
0 to 510 mm (in increments of 2)
0 to 510 mm (in increments of 2)
Manual mode/Auto mode 1/Auto mode 2
[Clear overlap pattern] check box
[Auto-Memorize MF Pattern (only when MF
images are displayed)] check box
Remember/Do not remember
TOP
Contents
Factory Default
Index
Not selected
Introduction
Scanner
Disable
Overview
How to Load
0 mm
Documents
How to Use the
0 mm
Operator Panel
Various Ways to
Manual mode
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Not selected

Operational

Settings
Not selected
Do not remember
Appendix
Glossary
155