Operational - Fujitsu fi-7160 Operator's Manual

Chapter 7 Troubleshooting
Temporary Errors
The following are lists of temporary errors which can be
recovered by operators.
■
Paper Feeding Errors
Error codes beginning with the letter "J" are displayed.
Error Error messages
code
J0:37 Paper protection 1 Remove the jammed document.
(feeding noise) For details, refer to
Remove and (page
check the
2 Check if the document is suitable for
document, and
scanning by ADF.
then try again
For details, refer to
carefully.
Scanning" (page
3 Press the [Menu] button on the
operator panel, select whether to
enable or disable the document
protection function, and then press the
[Scan/Enter] button or perform a scan
from the computer.
Action
"7.1 Paper Jam"
110).
"2.2 Documents for
41).
Error Error messages
code
J0:51 Paper protection 1 Remove the jammed document.
(feeding For details, refer to
accuracy) (page
Remove and
2 Make sure that documents that are
check the
folded or documents that do not
document, and
conform to the paper specifications,
then try again
such as thin paper, are not included.
carefully.
For details, refer to
Scanning" (page
3 Press the [Menu] button on the
operator panel, select whether to
enable or disable the document
protection function, and then press the
[Scan/Enter] button or perform a scan
from the computer.
J1:31 Paper jam 1 Remove the jammed document.
J1:5A Remove and For details, refer to
check the (page
document, and try
2 Check if the document is suitable for
again.
scanning by ADF.
For details, refer to
J1:50 Pick error
Scanning" (page
Remove and
3 Clean the rollers.
check the
For details, refer to
document, and try
Care" (page
again.
Action
"7.1 Paper Jam"
110).
"2.2 Documents for
41).
"7.1 Paper Jam"
110).
"2.2 Documents for
41).
"Chapter 5 Daily
91).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
113