Operational - Fujitsu fi-7160 Operator's Manual

Chapter 3 How to Use the Operator Panel
Indicator
Information
[Consumables], [Cleaning], [Clean glass!], or [maintenance] also flashes on the second line in the [Ready] screen.
For information regarding appropriate actions to take when
Prioritize Panel Settings
appears when the operator panel settings are prioritized.
For details, refer to
Application Number
Displays the number for the application that you want to launch when you press the [Scan/Enter] button while the [Ready]
screen is displayed.
For details, refer to
iMFF Setting
Displays the iMFF setting as follows:
Icon
In Manual mode,
In Auto mode 1 and Auto mode 2, the number of multifeed patterns memorized (max. of 8 patterns) is displayed.
For details, refer to
flashes when there is a message for replacing consumables/cleaning/glass cleaning/regular maintenance.
"3.2 Settings Menu" (page 55).
"3.3 Function Selection" (page
Mode
Manual
mode
Auto mode 1
Auto mode 2
is displayed at all times.
"3.2 Settings Menu" (page 55).
flashes, refer to "3.2 Settings Menu" (page
73).
TOP
Contents
Index
Introduction
Scanner
Overview
55).
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
54