Chapter 6 Replacing the Consumables
8
Close the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page
Be careful not to get your fingers caught
when closing the ADF.
9
Attach the ADF paper chute (feeder).
Insert the tabs into the slots on the back of the scanner in the
1
direction of arrow
and tilt the ADF paper chute (feeder)
downwards in the direction of arrow
Attach the ADF paper chute (feeder) with the side guides facing
upwards.
1
ATTENTION
Do not leave any space between the ADF paper chute (feeder) and
the scanner.
21).
2
until it locks in place.
Tab
Side Guides
ADF Paper Chute
(Feeder)
2
10
Reset the pick roller counter.
Reset the counter by performing one of the following actions:
Reset the counter in [4: Consumable counters] on the [Settings
Menu] screen of the operator panel.
For details, refer to
"3.2 Settings Menu" (page
Reset the counter in the Software Operation Panel.
For details, refer to
"Resetting the Sheet Counters" (page
TOP
Contents
Index
Introduction
55).
Scanner
Overview
160).
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
108