Operational - Fujitsu fi-7160 Operator's Manual

Appendix
Item
Output Binary (black &
resolution white)
Grayscale
Color
Grayscale Binary (black &
level white)
Grayscale
Color
Interface
LCD
*1: Long page scanning supports documents with a length of up to 5,588 mm (220 in.) when the resolution is set to 200 dpi or less.
*2: When scanning plastic cards from the ADF, you can load up to 3 cards in the ADF paper chute (feeder).
*3: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*4: The capacity varies depending on the paper weight.
For details, refer to "2.2 Documents for Scanning" (page
*5: Use the USB cable that is supplied.
When connecting the USB cable to a USB hub, make sure you connect it to a USB hub that is connected to the USB port of a computer.
Connection with USB 3.0/2.0 requires the USB port and the hub to support USB 3.0/2.0. Also note that the scanning speed slows down when USB 1.1 is
used.
Specification
fi-7460
50 to 600 dpi, 1200 dpi
1-bit
8-bit
24-bit
USB 3.0/2.0/1.1 (*5)
Display: FSTN (black & white)
Displayed dots: 110 × 65 dots
Displayed lines: 5 × 16 (row × column)
41).
fi-7480
50 to 600 dpi: configurable in 1 dpi
increments
1,200 dpi: created by scanner driver
12-bit for each color during internal
processing
B Type
Comes with a backlight
TOP
Contents
Notes
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Operational
Settings Settings
Appendix
Glossary
191