Operational - Fujitsu fi-7160 Operator's Manual

Chapter 2 How to Load Documents
Paper Size
When you scan a mixed batch with different sizes, not feeding the
documents straight may cause troubles such as paper jams or part of
the image to appear missing.
It is recommended that you check the documents thoroughly before
scanning and also check the image if the document was skewed.
ATTENTION
 When a mixed batch with different sizes is scanned, documents are
more likely to skew because the side guides do not contact every
sheet.
 Do not use [Check Length] or [Check Overlapping and Length] for
multifeed detection.
Documents That Cannot Be Scanned in a Mixed Batch
The following types of documents cannot be mixed in the same batch:
 Carbonless paper
 Bond paper
 Perforated documents
 Thermal paper
 Carbon-backed paper
 OHP film
 Tracing paper
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
47