Chapter 7 Troubleshooting
There are black traces on the document.
Are you scanning documents written in lead pencil or
carbon paper?
No
Are the glass and rollers inside the ADF clean?
Yes
When you scan documents written in lead pencil, make sure to clean the rollers
frequently. Otherwise, the rollers will be contaminated which may leave black
Yes
traces on the document or cause feeding errors.
For details, refer to
"Chapter 5 Daily Care" (page
Clean the inside of the ADF.
For details, refer to
"Chapter 5 Daily Care" (page
No
If the problem persists, check the items in
Service Provider" (page 139)
an authorized FUJITSU scanner service provider.
91).
91).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
138