Setting Up The Adf Paper Chute (Feeder); Operational - Fujitsu fi-7160 Operator's Manual

Chapter 1 Scanner Overview

1.5 Setting Up the ADF Paper Chute (Feeder)

Documents loaded in the ADF paper chute (feeder) are fed
into the ADF one by one.
Using the chute extensions as in the following procedure will
keep the documents straight and feed them smoothly.
1
Pull out chute extension 1.
HINT
Make sure to hold the scanner while you pull out the chute
extension.
2
Chute Extension 1
Lift up chute extension 2.
HINT
If a multifeed occurs for relatively long documents, or if documents
lean forward while scanning, slightly pull up chute extension 2 and
push it down towards the back, and then load the documents to
scan the documents smoothly.
 
Chute Extension 2
 
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
22