Ricoh M5 Service Manual page 148

Fusing
1. Be careful not to damage the edge of the strippers or their springs.
2. Make sure both ends of the fusing lamp are properly set on the terminals.
Paper Feed
Do not allow the pick-up roller, turn rollers, feed rollers, or relay rollers to become oily or dirty
Operator Instruction
1. Operation of the copier:
Using the operating instructions, teach the customer how to do the following:
Open the upper clamshell.
Supply toner. (Use the cartridge crank.)
Agitate the toner metering blade. (Use the toner agitator.)
Install the development unit.
Clean the corona wire and the fiber optics. (Use the cleaner.)
Clear misfed paper.
Load the cassette.
Make color copies, two-sided copies, and business card copies.
2. Original:
Originals to be copied must be less than 30 mm (1 3/8 inches) in
pounds) in weight.
thick or heavy originals.
3. Paper:
When not used for a long period, paper should be kept in the original package and stored in a
cool dry place (To prevent paper from absorbing water from the air).
Advise the customers of the type of paper they should use to prevent misfeed.
Correct curled paper before making copies.
sided copies and multi-colored copies.
Faint copies may sometimes result when
quality is a very important factor here.)
The platen cover cannot close and the slider cannot move with excessively
This is especially important when making two-
using very thick or very thin paper.
4 - 3
May, 25, 1985
thickness and 3 kg (6 1/2
(The paper