Slider Solenoid - Ricoh M5 Service Manual

– Slider Solenoid –
Slider
Female Connector
2P
Remove the slider and rear cover.
1 .
2 .
Disconnect two 2P and 3P connectors.
3 . Remove the pulse generator bracket (1 screw).
3 . Remove the slider clutch bracket (3 screws), and unhook the slider stopper spring. (Do not
break the slider stopper pin.)
4 .
Remove the solenoid 2P female connector from the slider clutch bracket.
5 . Remove the slider drive gear.
6 . Remove the slider solenoid (1 E-ring and 2 screws).
NOTE: Check that the slider stopper spring and pin are correctly mounted.
(See
page 3-79.)
3 - 2 7
25, 1985
May,