Table of Contents
Advertisement
– Exposure Lamp –
.-. "
Front E
Term
1. Remove the front and rear covers. (See page 3-79.)
2. Remove the slider. (See page 3-79.)
3. Remove the exposure cover (1 screw).
4. Remove the reflector (2 screws). Do not get the reflector dirty.
5. Remove the front exposure lamp terminal (1 small screw).
6. Pull the exposure lamp out from the copier.
NOTE: 1. Do not touch the aperture of the new exposure lamp.
2. Make sure the aperture is facing up.
Exposure Lamp
3 - 2 2
May, 25, 1985
Aperture Surface
sure Lamp
Advertisement
Chapters
Table of Contents
