Slider Clutch - Ricoh M5 Service Manual

– Slider Clutch –
Remove the slider and rear cover (See page 3-79.)
1 .
2 . Disconnect the two 2P and two 3P connectors.
3 . Remove the pulse generator bracket (1 screw).
4 . Remove the wire harness from the wire clamp.
Remove the slider clutch bracket (3 screws) and
5 .
bracket. (Do not break the slider stopper pin.)
Remove the slider drive gear,
6 .
C (1 E-ring and 1 spacer).
Remove gear
7 .
Remove the reverse clutch and/or forward clutch.
8 .
B
gear pulse generator
3 - 2 5
disk, and bushings
May, 25, 1985