Replacement Of Parts; Exposure Glass - Ricoh M5 Service Manual

25, 1985
May,

8. Replacement of Parts

— Exposure Glass –
.-. .
1. Hold the front side of the platen cover and push it towards the rear to disengage the fasteners.
Handle the platen cover carefully.
CAUTION: The fasteners break off under strong force.
2. Remove the platen cover.
3. Remove the slider cover (2 screws).
4. Remove the exposure glass assembly (2screws).
NOTE: After installing the exposure glass, the front scale must be in the groove of the front
cover.
3 - 2 0