Table of Contents
Advertisement
6.
Replacement of Parts
1. Remove the copy tray.
2 .
Remove the rear cover (2 screws).
3 .
Remove the front cover.
4 .
Open the upper clamshell and stand it straight.
CAUTION: Place a block
5 .
Open the exit cover and remove the fusing unit cover (2 screws).
6 .
Pull and rotate the front terminal bracket counterclockwise.
7 .
Remove the fusing lamp.
NOTE: Make
sure that both ends of the fusing lamp properly contact the terminals.
(See page 3-79.)
in front of the exit cover.
3 - 7 0
(See page 3-80.)
May, 25, 1985
Advertisement
Chapters
Table of Contents
