Dc Power Supply Board - Ricoh M5 Service Manual

– Dc Power Supply Board –
1. Follow steps 1 through 3 of Transfer Corona Nylon Wire Replacement. (See page 3-44.)
2. Remove the front inner cover (2 screws).
3. Swing open the transfer unit.
4. Disconnect the 4P connector on the dc power supply board.
5. Disconnect the 5P connector on the interface board and the 3P connector on the transfer/bias
power pack.
6. Remove the dc power supply board (4 screws).
..-
3 - 8 5
May, 25, 1985
Supply Board