Adjustment Of Parts; Leading Edge Registration - Ricoh M5 Service Manual

7. Adjustment of Parts

— Leading Edge Registration –
Lay a ruler on the exposure glass as shown in the figure.
1 .
2 . Make a few copies and check that the leading edge registration is within standard.
Leading Edge Registration Standard:
If it is out of the standard, adjust it using DIP SW No. 2, 3, and 4 on the main board. (Remove
3 .
the front cover.)
.-.'
Ruler
4
DIP SW
,
3-61
25, 1985
May,
DIP SW TABLE