Registration Solenoid - Ricoh M5 Service Manual

– Registration Solenoid –
Upper Guide
I
Front
Open the upper clamshell and remove the development unit and cassette.
2 . Remove the front inner cover (2 screws).
3 . Remove the development lower cover (2 screws).
4 . Remove the upper guide.
5 . Remove the lower guide plate (4 screws).
6 . Remove the registration plate (1 spring).
7. Disconnect the 2P connector on the interface
8, Remove the registration solenoid (2 screws).
board.
3 - 5 9
25, 1985
May,
r Cover
Plate