Ozone Filter - Ricoh M5 Service Manual

– Ozone Filter –
1. Open the upper clamshell and remove the master unit.
(Avoid exposing the master unit to light.)
2. Remove the copy tray and the two stud screws, then stand the upper clamshell straight
up. (See page 3-80.)
CAUTION: Place a block in front of the exit cover.
3. Remove the toner overflow sensor (1 screw).
4. Replace the ozone filter as shown.
Toner Overflow Sensor
(See page 3-80.)
3-81
May, 25, 1985