Replacement Of Parts; Exterior Parts - Ricoh M5 Service Manual

5. Replacement of Parts

–
Exterior Parts –
1. Front Cover
Remove 4 screws.
NOTE: After installing the front cover, the edge of exposure glass must be in the groove of the
front cover.
2. Rear Cover
– Remove 2 screws and open the upper clamshell.
— Lift up the rear cover and remove.
3. Slider
— Move the slider
– Slide the slider off the accuride rail (arrow direction).
NOTE: * After installing the slider, make sure that the slider moves smoothly.
* When installing the slider, be careful not to damage the actuator of the home position
switch.
Slider
To get at the top screws, move the slider left and right.
remove a stud screw.
to the right and
3 - 7 9
May, 25, 1985