Replacement Of Parts; Transfer Corona Nylon Wire - Ricoh M5 Service Manual

4. Replacement of Parts

— Transfer Corona Nylon Wire —
.- .
1 . Open the upper clamshell and remove the development unit.
2 . Swing open the upper guide.
3 . Remove the transfer unit stopper (1 screw). Use a stubby screwdriver.
4 .
Swing up the corona unit and unplug the transfer cable from the
pliers.
CAUTION:
Do not pull on the cable at the corona endblock.
5 . Remove the transfer corona unit.
6 . Remove the nylon wire.
Transfer Corona Unit
Nylon Wire
\
3 - 4 4
25, 1985
May,
Unit
power pack using needle-nosed