Standards And Approvals; General Rules; B.1 General Rules - Siemens SIMOTION D410-2DP/PN Installation Manual

Standards and approvals

B.1

General rules

CE marking
Electromagnetic compatibility
Standards for EMC are satisfied if the EMC Installation Guideline is observed.
SIMOTION products are designed for industrial use in accordance with product standard DIN
EN 61800‑3, Category C2.
cULus Approval
EMC
KOREA
For sellers or other users, please keep in mind that this device is an A‑grade electromagnetic wave
device. This device is intended to be used in areas other than home.
The EMC limit values to be observed for Korea correspond to the limit values of the EMC product
standard for variable-speed electric drives EN 61800‑3 of category C2 or the limit value class A, Group
1 to CISPR11. By implementing appropriate additional measures, the limit values according to category
C2 or limit value class A, Group 1, are observed. For this purpose, additional measures, such as e.g.,
the use of an additional RFI suppression filter (EMC filter) may be necessary. In addition, measures
for EMC-compliant configuration of the plant are described in this Manual and/or the Configuration
Manual "EMC Installation Guideline". Please note that ultimately it is always the label on the device
that provides the decisive information on the compliance with standards.
AUSTRALIA
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015
Our products satisfy the requirements and protection objectives of the EC Di‐
rectives and comply with the harmonized European standards (EN).
Listed component mark for United States and the Canada Underwriters Labo‐
ratories (UL) according to Standard UL 508, File E164110, File E115352, File
E85972.
D410-2 DP and D410‑2 DP/PN meet the requirements of the AS61800‑3.
B
323