Configuring Local Measuring Inputs; Configuring Output Cams / Cam Tracks - Siemens SIMOTION D410-2DP/PN Installation Manual

Commissioning (software)
7.11 Configuring technology objects and I/O variables
Figure 7-33 Configuration of a global measuring input for SIMOTION D410-2
Additional references
Detailed information on the configuration of the TO measuring input can be found in the
SIMOTION Output Cams and Measuring Inputs Function Manual.
7.11.2

Configuring local measuring inputs

Local measuring inputs are drive-related measuring inputs. The configuration is performed via
drive parameters.
For further details, see:
● Configuring drive-related I/Os (without symbolic assignment) (Page 317) In the Appendix
SIMOTION Output Cams and Measuring Inputs Function Manual
●
7.11.3

Configuring output cams / cam tracks

Overview
The type of cam output must be selected during the configuration of the TO outputCam and
TO camTrack.
212
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION D410-2