Technical Specifications; Certificates And Approvals; Standards, Certificates And Approvals - Siemens SIMATIC Mobile Client900WXN Operating Instructions Manual

Technical specifications

7.1

Certificates and approvals

7.1.1

Standards, certificates and approvals

Note
The only valid approvals for the HMI device and the connection box itself are those shown
on the label on the rear panel.
CE approval
The device and the connection box satisfy the requirements and protection objectives of the
following EC directives. The HMI device and the connection box comply with the harmonized
European standards, promulgated in the Official Journals of the European Community for
programmable logic controllers:
● 2004/108/EC Electromagnetic Compatibility Directive (EMC Directive)
EC Declaration of Conformity
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Factory, Factory Automation
DF FA SE R&D
Breslauer Str. 5
DE-90766 Fürth, Germany
UL approval
The device satisfies the requirements according to Underwriters Laboratories Inc.
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
Marking for Australia
The device and the connection box satisfy the requirements of standard AS/NZS 2064
(Class A).
Mobile Client900WXN
Operating Instructions, 04/2015, A5E35883103-AB
7
69