Standards And Approvals; Recycling And Disposal - Siemens SINUMERIK MCU1720 Equipment Manual

10.2

Standards and approvals

Approvals
The following table shows symbols relating to certificates, approvals and markings that can be
found on the device. You will find detailed information in the Operating Instructions for your
device.
Symbol Meaning
Approvals for Australia and New Zea‐
land
Approval for Korea
CE mark for the European countries
Disposal notice, please observe the
local regulations
The operator panels and the safety-relevant accessories satisfy the requirements and
protection objectives of the following EC directives. The operator panels and the safety-
relevant accessories comply with the harmonized European standards (EN), promulgated in
the Official Journals of the European Community:
● 2004/108/EC "Electromagnetic Compatibility" (EMC directive)
● Directive 2006/42/EC of the European Parliament and Council of May 17, 2006, on
machinery, and Directive 95/16/EC (amendment)
China RoHS
The products comply with the China RoHS directive. Further information can be found in the
Internet at the following link: SIOS
109738656/china-rohs-manufacturer?dti=0&lc=en-WW)
10.3

Recycling and disposal

For environmentally friendly recycling and disposal of your old device, please contact a
company certified for the disposal of electrical and electronic waste and dispose of the device
in accordance with the regulations in your country.
MCU 1720
Equipment Manual, 09/2019, A5E47437728B AB
Symbol
FM
APPROVED
(https://support.industry.siemens.com/cs/document/
Technical specifications
10.3 Recycling and disposal
Meaning
Marking for Eurasian Customs Union
Test symbol of the Factory Mutual Re‐
search
Test symbol of the Underwriters' Lab‐
oratories
EFUP (Environment-Friendly Use Pe‐
riod) - Marking for China
89