Configuring The Digital Inputs And Digital Inputs/Outputs (X122/X132) - Siemens SIMATIC S7-1500 System Manual

9.10 Configuring the digital inputs and digital inputs/outputs
(X122/X132)
The digital inputs and digital inputs/outputs (X122/X132) are assigned to SINAMICS
Integrated. Through configuration (frames 39x), you can, however, also use the digital inputs
and digital inputs/outputs (X122/X132) for the CPU. The following applies:
• A digital output is always only available exclusively to SINAMICS Integrated or to the CPU.
• If you use a digital input for the CPU, you can also interconnect the digital input at the
drive end.
You can configure the digital inputs and digital inputs/outputs (X122/X132) channel by
channel. To do so, go to the function view in the project tree under "Automatic speed control"
> "Parameter assignment" and set the configuration under "Inputs/outputs".
Bidirectional inputs/outputs are configured in the following configuration mask.
Figure 9-31 Bidirectional inputs/outputs
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD

9.10 Configuring the digital inputs and digital inputs/outputs (X122/X132)

Configuring
195