AudioCodes Mediant 3000 User Manual page 519

SIP User's Manual
All other parameters are set to their respective default values.
The ini file matching this configuration can be written as follows:
; Interface Table Configuration:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_IPv6InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0
InterfaceTable 1
InterfaceTable 2
myMediaIF;
[\InterfaceTable]
; VLAN related parameters:
VlanMode = 1
VlanNativeVlanId = 1
; Routing Table Configuration:
RoutingTableDestinationsColumn = 176.85.49.0
RoutingTableDestinationPrefixLensColumn = 24
RoutingTableGatewaysColumn = 192.168.0.1
RoutingTableInterfacesColumn = 0
RoutingTableHopsCountColumn = 1
Ensure that the private addresses are not configured in the Multiple Interface table. The
same ini file must be loaded to both blades.
Version 5.8
= 0, 0, 192.168.85.14,
= 2, 0, 200.200.85.14,
= 1, 0, 211.211.85.14,
16, 0.0.0.0, 1, ManagementIF;
24, 0.0.0.0, 200, myControlIF;
24, 211.211.85.1, 211,
519
10. Networking Capabilities
September 2009