Call Detail Record - AudioCodes Mediant 3000 User Manual

SIP User's Manual
9.11

Call Detail Record

The Call Detail Record (CDR) contains vital statistic information on calls made by the
device. CDRs are generated at the end and (optionally) at the beginning of each call
(determined by the parameter CDRReportLevel), and then sent to a Syslog server. The
destination IP address for CDR logs is determined by the parameter CDRSyslogServerIP.
For CDR in RADIUS format, refer to ''Supported RADIUS Attributes'' on page 473.
The following table lists the supported CDR fields.
Field Name
ReportType
Cid
CallId
Trunk
BChan
ConId
TG
EPTyp
Orig
SourceIp
DestIp
TON
NPI
SrcPhoneNum
SrcNumBeforeMap
TON
NPI
DstPhoneNum
DstNumBeforeMap
Durat
Coder
Intrv
RtpIp
Port
TrmSd
TrmReason
Fax
Version 5.8
Table 9-7: Supported CDR Fields
Report for either Call Started, Call Connected, or Call Released
Port Number
SIP Call Identifier
Physical Trunk Number
Selected B-Channel
SIP Conference ID
Trunk Group Number
Endpoint Type
Call Originator (IP, Tel)
Source IP Address
Destination IP Address
Source Phone Number Type
Source Phone Number Plan
Source Phone Number
Source Number Before Manipulation
Destination Phone Number Type
Destination Phone Number Plan
Destination Phone Number
Destination Number Before Manipulation
Call Duration
Selected Coder
Packet Interval
RTP IP Address
Remote RTP Port
Initiator of Call Release (IP, Tel, Unknown)
Termination Reason
Fax Transaction during the Call
477
9. IP Telephony Capabilities
Description
September 2009