Configuring Digital Pcm Settings - AudioCodes Mediant 3000 User Manual

SIP User's Manual
3.3.9.2

Configuring Digital PCM Settings

The 'Digital PCM Settings' page allows you to configure the PCM companding law in
input/output TDM bus, and PCM and ABCD patterns. For a description of these
parameters, refer to ''PSTN Parameters'' on page 353.
To configure the digital PCM settings:
1. Open the 'Digital PCM Settings' page (Configuration tab > TDM & Timing
Configuration menu > Digital PCM Settings page item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. Save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
Version 5.8
Figure 3-91: Digital PCM Settings Page
179
3. Web-Based Management
September 2009