AudioCodes Mediant 3000 User Manual page 412

Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

Parameter
Web: Source Phone Number
Manipulation Table for IP to Tel Calls
EMS: SIP Manipulations > Source IP to
Telcom
[SourceNumberMapIP2Tel]
SIP User's Manual
Description
Parameters can be skipped by using two dollar signs
('$$').
An asterisk ('*') represents all IP addresses.
IsPresentationRestricted is set to 'Restricted' only if
'Asserted Identity Mode' is set to 'P-Asserted'.
Number Plan and Type can optionally be used in
Remote Party ID (RPID) header by using the
EnableRPIHeader and AddTON2RPI parameters.
To configure manipulation of source numbers for Tel-to-
IP calls using the Web interface, refer to ''Configuring
the Number Manipulation Tables'' on page 142).
For a description on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' on page 221.
This ini file table parameter manipulates the source
number for IP-to-Tel calls. The format of this parameter is
as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For example:
[SourceNumberMapIp2Tel]
SourceNumberMapIp2Tel 0 =
22,03,$$,$$,$$,$$,2,667,$$,$$;
SourceNumberMapIp2Tel 1 =
034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
[\SourceNumberMapIp2Tel]
Notes:
RemoveFromLeft, RemoveFromRight, Prefix2Add,
Suffix2Add, LeaveFromRight, NumberType, and
NumberPlan are applied if the called and calling
numbers match the DestinationPrefix, SourcePrefix,
and SourceAddress conditions.
The manipulation rules are executed in the following
order: RemoveFromLeft, RemoveFromRight,
LeaveFromRight, Prefix2Add, and Suffix2Add.
Parameters can be skipped by using two dollar signs
('$$').
The Source IP address can include the 'x' wildcard to
represent single digits. For example: 10.8.8.xx
represents all addresses between 10.8.8.10 and
10.8.8.99.
412
Mediant 3000
Document #: LTRT-89707

Advertisement

Table of Contents
loading

Table of Contents