3.3.9
TDM and Timing Configuration
The TDM & Timing Configuration menu allows you to configure TDM and clock timing
parameters. This menu includes the following items:
TDM (refer to ''Configuring TDM Bus Settings'' on page 178)
Digital PCM Settings (refer to ''Configuring Digital PCM Settings'' on page 178)
System Timing (refer to ''Configuring System Timing'' on page 179)
Note:
3.3.9.1
Configuring TDM Bus Settings
The 'TDM Bus Settings' page allows you to configure the device's Time-Division
Multiplexing (TDM) bus settings. For a description of these parameters, refer to ''PSTN
Parameters'' on page 353.
To configure the TDM Bus settings:
1.
Open the 'TDM Bus Settings' page (Configuration tab > TDM & Timing
Configuration menu > TDM page item).
2.
Configure the parameters as required.
3.
Click the Submit button to save your changes.
4.
Save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
SIP User's Manual
If you are modifying multiple pages, perform a device reset (if required) only
after you have completed modifying all the required pages (and not after each
page). This ensures that your configuration settings are applied.
Figure 3-90: TDM Bus Settings Page
178
Mediant 3000
Document #: LTRT-89707